The levers for clutch and front brake take m8 threaded adjusters
The levers for Clutch and front brake take 8mm ø x 9.5mm drum nipples
Honda fitted black cables to these bikes, whereas the CB100 had standard Honda silver grey cables.
There are 5 cables:
Aftermarket part currently fitted is 830mm long (outer casing) and is ok
The “slinky glide” aftermarket part currently fitted is 780mm long (outer casing) and is far too short. I estimate that the standard length should be 1000mm minimum. so some research turns up this:
Total Length of Cable: 1124mm (44 1/4“)
Length on Outer Housing: 972mm (38 1/4”)
Overall Length from ferule end to end of adjuster: 1048mm (41 1/8“)
This cable is the same as these other honda models CB 90 to 125 CL 90 to 125 CS 90 SL 90 to 125 XL 100 TL 250 C200
aftermarket part currently fitted is 700mm long (outer casing) and is ok
the speedo cable has a spade end at the wheel fitting - unlike the speedo
aftermarket part currently fitted is 880mm long (outer casing) and is ok the speedo cable has a slotted end at the wheel fitting - unlike the tacho